How it works:

1. Thread the hollow glass spheres, olives and gem discs on the chain stitches.

2. Use a side cutter to trim the end of the chain stitches to 1cm

3. Bend the ends to an eyelet with a round nose plier.

4. Fix the metal geo parts with rivet pins: Push the rivet pin from the inside out through the hole in the geo part. Trim the protruding piece to 1cm.

5. Bend the end of the rivet pin to an eyelet.

6. Now hook in turns three metal geo parts and a hollow glass bead into one another.

7. Finish it by trimming the link chain to the desired length and hang the ends into the last two hollow glass spheres.